ATS E6501S, User Manual

Page: 32 / 47

- Page 32 -
- Password
: Enter in this field the PPP Password that was provided by your ISP.
This user name is used to authenticate the PPP session with the ISP.
- Keep Alive
: Select this option if you would like to keep your PPPoE session
active at all times by using a Keepalive timer. This would be useful if its
important that you have very low latency responses to internet requests at all
times. Otherwise, your PPPoE session may timeout and it may take a second or
two to reconnect.
- Max Idle Time
: Enter in this field the number of minutes after which you
would like the PPPoE session to be disconnected. This setting is ignored if
Keep Alive
is selected.
Network – LAN Config
Enter this page by clicking
NETWORK
and then
LAN Config
at the menu on the left of
the screen. The LAN Config page will display on screen. Always remember to click
APPLY to save the changes you have made.
LAN IP Address
: This is the IP address assigned to the LAN port on your E6501S. The
factory default value for this address is 192.168.10.1. This is the address that will be
entered to access the configuration web pages. If you change this value you must use the
new address to access the web pages.
Subnet Mask
: This is subnet mask associated with the assigned LAN IP address of your
E6501S LAN port.
MAC Address
: This is the MAC address of the LAN port’s physical interface.