ATS E6501S, User Manual

Page: 25 / 47

- Page 25 -
Connect E6501S behind an existing router
If you decide to use the existing router connecting to your computer(s), follow the
instructions provided with your router to enable DHCP service on the LAN interface of
the router so that the E6501S is able to communicate with your router automatically.
Since your computer(s) are still connected directly to your old router, you shouldn’t have
to change their configuration. If manual addressing is preferred between the E6501S and
your existing router, see
Chapter 5
for information on how to configure a static IP
address on the E6501S’s WAN port.