ATS E6501S, User Manual

Page: 31 / 47

- Page 31 -
Spoofed MAC Address
: Some ISPs require the device connected to the cable or DSL
modems to use a specific MAC address. You can enter a value in this field to force the
E6501S to use the MAC address you specify on the WAN port.
Static, DHCP, PPPoE
: These are the connection methods that the E6501S WAN port
uses to obtain IP address. Only one of these connection methods can be selected at a time.
DHCP - Host Name
: Some ISPs need to have the host name field populated with this
value when a DHCP request is made. Your ISP will provide this value if needed.
- Domain Name
: Some ISPs need to have the domain name field populated with
this value when a DHCP request is made. Your ISP will provide this value if
needed.
Static - IP Address
: Once the Static connection method is selected, enter in this field
the IP address you would like to assign to the WAN port of the E6501S. This
should be provided by your ISP.
- Subnet Mask
: Enter in this field the IP Mask or Subnet Mask associated with
the WAN. This should be provided by your ISP.
- Gateway:
Enter in this field the Default Gateway or Router IP address to be
used by the E6501S. This should be provided by your ISP.
- Primary DNS
: Enter in this field the Primary DNS IP address to be used by the
E6501S. This should be provided by your ISP.
- Secondary DNS
: Enter in this field the Primary DNS IP address to be used by
the E6501S. This should be provided by your ISP.
PPPoE - User Name
: Enter in this field the PPP User Name that was provided by your
ISP. This user name is used to authenticate the PPP session with the ISP.