Atrie BUB-204B, Operation Manual

Page: 8 / 20

Processor
.
Firmware ID
: Identifies which version of firmware is currently loaded on the module. BlueFlash
does not identify firmware created before Beta 10 release. If BlueFlash is unable to
identify the firmware version, you will still able to upgrade the firmware using this
utility.
Dump
: Allows the user to download the contents of the flash to a file on the PC hard drive.
The data can be stored either as BlueCore .xpv/.xdv files or as a binary file. The file
also contains all of the Persistent Store settings, allowing you to restore to a known
firmware build and Persistent Store settings.
Flash Erase
: Provides options for erasing some or all of the flash memory including the Persistent
Store area.
File ID
: Displays the name and version of firmware of the file selected for download on the
module.
File Selection
: This area displays the name and location of the file selected for download.
Flash Type
: This area displays the type of flash memory that has been identified on the BlueCore
module. Flash type is identified when the processor is stopped. Different types of flash
memory may have different memory block structures that require adjustments to
BlueCore’s memory map. If the flash type indicates
Unrecognised Flash assuming SST , either the flash on the BlueCore module
is not supported, or there is a problem with the SPI connection. See section 5.1.3,
Troubleshooting BlueFlash, for further information.
LPT Selection
: This pull-down menu allows the user to select the LPT port to which the SPI cable is
connected.
CSR
: This indicates the version of the BlueFlash application in use.