To change to H4:
1. Change the Host Interface.
l
Select the Host Interface PS Key (505 PSKEY_HOST_INTERFACE).
l
Set to
UART link running H4
using the pull-down menu.
l
Click on
Set
to update the Persistent Store.
2. Configure the UART interface.
l
Select the PSKEY UART configuration bitfield (517 PSKEY_UART_CONFIG).
l
Set this value to
168
.
l
Click on
Set
to update the Persistent Store.
3. Set baud rate.
l
Select the UART baud rate PS Key (516 PSKEY_UART_BAUD_RATE).
l
Set to the required baud rate (e.g., 115.2 kbaud).
l
Click on
Set
to update the Persistent Store.
4. Reset BlueCore.
This configures the BlueCore module to use H4 over the UART.
The UART configuration Bitfiled key is a presentation key. Set this to
168
configure to the following keys:
l
UART: Stop Bits PS Key to
One stop bit
l
UART: Parity Bit PS Key to
No parity
l
UART: Hardware Flow Control? PS Key to
Enabled
l
UART: RTS Asserted? PS Key to
True
l
UART: Enable BCSP-specific hardware PS Key to
False
Summary of Contents for BUB-204B
Page 1: ...Bluetooth USB Module BUB 204B Operation Manual Date 12 07 2006 Version V1 2 ...
Page 2: ......
Page 3: ......