3
tools after adjustments have been made to the
drilling machine. Always remove all adjustment tools
before using the drilling machine.
Always Use a Cutter that is Appropriate for Your
Work
●
Always use a Cutter that is appropriate for your
work. Avoid heavy-duty work that is the beyond the
capacity of your drilling machine. If the work exceeds
the capacity of your drilling machine, this can cause
accidents and severe injuries. Always use the
drilling machine in accordance with its performance
specifications.
SAFE HANDLING
●
Never leave the magnetic drilling machine
unattended while it is running. When the machine
is unattended, disconnect the power source. Do
not leave the work area until the machine comes to
a complete stop. Operating the machine while it is
unattended can case accidents that may result in
severe injuries.
HOW TO STORE YOUR MAGNETIC DRILLING
MACHINE
●
Always store the machine in a dry area.
●
Always keep the machine out of the reach of
children.
HOW TO CARRY YOUR MAGNETIC DRILLING
MACHINE
●
Disconnect the power and turn off the machine
whenever you carry the machine.
MAINTENANCE
Do not take apart or modify your magnetic drilling
machine.
●
Do not attempt to disassemble or modify your
magnetic drilling machine.
●
Do not modify your magnetic drilling machine.
Modifications can cause accident and severe
injuries.
●
All service and repairs must be performed by an
authorized Nitto dealer. Any attempt to service or
repair the machine yourself may result in an accident
and severe injuries.
Check all Parts for Damage.
●
Always inspect the magnetic drilling machine before
use.
●
Always check that the pilot pin and cutter are in
good condition. Use of the machine with worn pilot
pins or worn cutter can cause accidents and severe
injuries.
●
Inspect all cutter before you put them on the
magnetic drilling machine.
●
Do not operate the magnetic drilling machine with a
damaged or worn cutter. Do not operate the machine
with a damaged or worn pilot pin. Do not operate the
machine with any damaged accessory. Operating
the machine with any damaged part or accessory
can cause accidents and severe injuries. If there is
any damage to the magnetic drilling machine do not
operate the machine. Take it to an authorized Nitto
Dealer for repair.
●
Always have the magnetic drilling machine repaired
at an authorized Nitto dealer. Always take the
magnetic drilling machine to an authorized Nitto
dealer for service, repair and replacement parts. If
you cannot locate an authorized Nitto dealer near
you, please contact your sales representative.
●
Always use Nitto genuine parts. The use of improper
or non-Nitto parts can cause accidents and severe
injuries. Never use unauthorized parts. To obtain
genuine Nitto parts, contact your sales agent.
●
Do not remove any nameplate from your magnetic
drilling machine. Do not remove any labels from
your magnetic drilling machine. If any label or
nameplate is damaged contact your sales agent for
a replacement.
POWER TOOL SAFETY
WARNING
●
Always make sure that the machine is properly
grounded. If the machine is not properly grounded,
someone can get an electric shock.
●
If you have any doubt about the grounding of
the magnetic drilling machine, contact a licensed
electrician.
●
Never connect the grounding conductor to a gas
pipe. This will result in an explosion and severe
injuries or death.
●
Always check the grounding conductor. If you have
any doubts about the grounding conductor contact a
licensed electrician.
●
Wiring connections to a grounding rod require the
expertise of a licensed electrician. Do not attempt
the wire connections yourself. Always contact a
licensed electrician.
●
Do not abuse the power cord. A damaged power
cord can cause an electrocution. A damaged power
cord can cause fires. Always inspect the cord. If the
cord is damaged, do not use the magnetic drilling
machine.
●
Do not carry the machine by the cord. Do not pull
the cord to disconnect it from a socket.
●
The cord can become damaged from heat, contact
with sharp objects or from being twisted. Always
inspect the cord. Do not use the machine if the cord
is damaged.
●
Always use a ground fault circuit interrupter. The use
of a ground fault circuit interrupter may be required
by government regulations. The failure to use a
ground fault circuit interrupter may result in electric
shock.
●
Avoid starting the magnetic drilling machine abruptly
or unintentionally.
●
Always make sure that the switch is turned off before
connecting the power source.
●
Always disconnect the power source and turn off
the switch before setting up for work operations.
Always disconnect the power and turn off the
switch when inspecting work. Always disconnect
the power and turn off the switch before attempting
any maintenance. Failure to disconnect the power
and turn off the switch during set up, inspection
or maintenance can cause accidents and severe
injuries.
ABOUT YOUR NITTO PORTABLE
MAGNETIC DRILLING MACHINE
DANGER
Do not use your portable drilling machine on the
ceiling.
●
Use of the portable drilling machine on the ceiling
is dangerous. The machine could fall. The falling
machine could cause severe injuries or death. (Fig.1)
Fig. 1
WARNING
Do not use the Magnet for more than five hours.
●
More than five hours of uninterrupted operation may
cause a fire. Five hours of uninterrupted operation
generates extreme heat in the Magnet. This heat
can cause a fire. Do not touch the Magnet. When
WOJ-3200.indd 3
10.11.12 11:10:29 PM
