background image

M - Hydraulic system

p. 84

M.

 Hydraulic system

LO PRESS

< 1500 psi. CAP (no auto off)

LO PR

pump delivery pressure less 
than 1500 psi. CAP. No auto 
off.

BLUE PUMP 

Supplied by ACW, controlled by 
DC EMER BUS

OVHT 

drain > 121°C (250°F). CAP. (no 
auto off).

GREEN PUMP

Supplied by ACW, controlled by 
DC BUS 2 or DC EMER BUS

LO LEVEL

associated compartment <2.5 l. 

HYD

 on CAP. 

X FEED

Pb released Xfeed closed. if LO LVL 
auto closes. (DC STBY BUS).

Auxiliary pump

Automatic running conditions 
(simultaneoustly):
– AUX Pump pb depressed
– at least one engine running
– blue system press <1500 psi
– prop brake off
– gear lever down
(supply: DC BUS 2 or Hot main bat bus)

2. HYD PWR panel

 

ATA 29

BRAKE ACCU

by blue system. for emer 
brakes max 6 applications.
(DC STBY)

Green HYD SYST

Green system hydraulic 
pressure indicator.

Blue HYD SYST

Blue system hydraulic pressure 
indicator.

3. Pressure indicator

 

ATA 29

4. AUX pump pedestal switch

 

ATA 29

AUX PUMP pedestal switch 

– energizes for 30’’, the auxiliary 
DC hydraulic pump with the 
HOT MAIN BAT BUS
– supplies power to the 
pressure indicators

NOTE:

 intensive use could 

discharge the main battery.

Summary of Contents for 42-500


































































































































Reviews: