manualshive.com logo in svg

ATR 42-500, Manual, Page: 72 / 129

Share
Download
ATR 42-500 Manual Download Page 72

K - Flight instruments

p. 71

AIRSPEED INDICATOR

displays the airspeed. Scale from 
60 Kt to 400 Kt.

VMO POINTER

in red and white strips indicates 
the max airspeed computed 
by the associated ADC which 
represents VMO/MMO. An 
aural warning (clacker) will 
be generated by the CCAS if 
overshoot

MOVABLE INDICES

(bugs) in four colors

SPEED SELECTOR

to set a desired speed during a 
given phase of flight and controls 
the reference on the EADI FAST/
SLOW scale.

OFF/RED FLAG

indicates a failure affecting the 
VMO channel or the airspeed 
indicator

15. Airspeed indicator

 

ATA 34

ALTIMETER

With baro set knob in MB and 
IN HG

ALTIMETER

With baro set knob in Hpa and 
IN HG

ALTITUDE ALERT

lt illuminates amber when altitude 
alert is triggered (-+ 1000 ft or +- 
250 ft)

16. Altimeter

 

ATA 34

RADIO MAGNETIC INDICATOR 
(RMI)

is coupled to the opposite AHRS 
with a compass rose, showing 
magnetic heading, two pointers.

Selector switch

permit to switch VOR 2 or ADF 2 
information which is represented 
on double green needle.

Selector switch

permit to switch VOR 1 or ADF 1 
information which is represented 
on simple yellow needle.

17. RMI

 

ATA 34

Summary of Contents for 42-500


































































































































Reviews:

No comments