background image

Email: 

[email protected]

                              Service Tel: 1-855-855-0399                                                              2 

Warranty Information 

 

One YEAR WARRANTY 

All claims for parts or labor must be made directly through Atosa.    All claims must include: model number of the unit. 
the serial number. proof of purchase, date of 
installation.  and  all  pertinent  information  supporting  the  alleged  defect.  In  case  of  compressor  replacement  under 
warranty. either compressor or compressor tag must be returned to Atosa along with above listed information. Failure 
to comply with warranty policies will result in voiding    claims.
 
One Year Parts & Labor Warranty 
Atosa warrants all new refrigerated components. such as the cabinet and all parts, to be free from defects in materials 
or workmanship. Atosa's obligation under this 
warranty is limited to a period of one (1) years from the date of original installation or 15 months after shipment date 
from  Atosa.  whichever  occurs  first.  All  parts  covered  under  this  warranty  that  are  defective  within  one(1)  years  of 
original  installation  or  fifteen  (15)  months  after  shipment  date  from  manufacturer,  whichever    occurs    first,  are 
limited to repair or replacement (including labor charges, of defective parts or assemblies) The labor warranty shall 
include standard straight time labor charges only and reasonable    travel time, as determined by Atosa. 
Additional Four Year Compressor Warranty 
In addition to the one(1) Year warranty stated above. Atosa warrants its sealed compressor to be free from defects in 
both  material  and  workmanship  under  normal  and  proper  use  and  maintenance  service  for  a  period  of  four  (4) 
additional  years  from  the  date  of  original  installation,but  not  to  exceed  five  (5)  years.  Compressors  that  have  been 
determined  to  be  defective  from  Atosa  within  this  extended  period  will  be  either  repaired  or  replaced  with  a 
compressor  or  compressor  parts  of  similar  design  and  capacity  according  to  Atosa's  discretion  .  The  four  (4)  year 
extended compressor warranty applies only to sealed parts of the compressor and does not apply to any other parts 
or  components.  This  includes.  the  cabinet,  paint  finish,  temperature  control,  refrigerant,  metering  device,  motor 
starting equipment, fan assembly and other electrical components, etc. 
404A / 134a Compressor Warranty 
The five-year compressor warranty detailed above will be void if the following procedure is not carefully adhered to: 
1 .This system contains R404A or R134a refrigerant and lubricant. The lubricant has rapid moisture absorbing qualities. 
2.Drier replacement is very important and must be changed when a system is opened for servicing. 
3.Micron level vacuums must be achieved to insure low moisture levels in the System. 
4.Compressor  must  be  obtained  through  Atosa  unless  otherwise  specified  in  writing  through  Atosa's  warranty 
department.
What is Not Covered by This Warranty 
Atosa's sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional 
limitations below This warranty neither assumes nor authorizes any person to assume obligations other than those 
expressly covered by this warranty. 
NO CONSEQUENTIAL DAMAGES:    ATOSA IS NOT RESPONSIBLE FOR ECONOMIC LOSS; PROFIT LOSS; OR SPECIAL. IN 
DIRECT, OR CONSEQUENTIAL DAMAGES,    INCLUDING WITHOUT LIMITATION, LOSSES. OR DAMAGES ARISING FROM 
FOOD OR PRODUCT SPOILAGE,REGARDLESS OF WHETHER OR NOT THEY RESULT FROM REFRIGERATION FAILURE. 
WARRANTY IS NOT TRANSFERABLE: This warranty is not assignable and applies only in favor of the original purchase 
/user to whom delivered. ANY SUCH ASSIGNMENT OR TRANSFER SHALL VOID THE WARRANNTIES    HEREIN 
AND  SHALL  VOID  ALL  WARRANTIES.  EXPRESS  OR  IMPLIED.  INCLUDING  ANY  WARRANTY  OF  MERCHANTABILITY  OR 

Summary of Contents for MWF9007












Reviews: