Atosa EBF-03, Instruction Manual

Page: 6 / 20

4
4.COMMISSIONING
Carefully read the label on the equipment, do not cover for any reason whatsoever. and replace them
immediately if damaged. Do not remove protection or panelling that require the usage of tools.
4.1 POSITIONING
Ensure that in respect of the dimensions, the space reserved for the equipment permits its correct
utilisation and ease of maintenance. After carefully unpacking the display case, remove the white PVC
protective film and all of the manufacturer's material which safeguards the item in transit. Place the
cabinet on a flat surface and level it by screwing and adjusting the leveling legs to ensure its efficient
operation. The cabinet must be lifted only from the exterior of the base to avoid the possibility of damage.
Do not move the cabinet by application of pressure to the surface.if the device has been positioned
horizontally (integral condensing unit).wait two hours before activating it. Packing and protective film
should be disposed off as indicated by the local authorities. The equipment must not be installed within
explosive amblence,In the open air or exposed to
Ensure that in respect of the dimensions, the space reserved for the equipment permits its correct
utilisation and ease of maintenance. After carefully unpacking the display case, remove the white PVC
protective film and all of the manufacturer's material which safeguards the item in transit. Place the
cabinet on a flat surface and level it by screwing and adjusting the leveling legs to ensure its efficient
operation. The cabinet must be lifted only from the exterior of the base to avoid the possibility of damage.
Do not move the cabinet by application of pressure to the surface.if the device has been positioned
horizontally (integral condensing unit).wait two hours before activating it. Packing and protective film
should be disposed off as indicated by the local authorities. The equipment must not be installed within
explosive amblence, In the open air or exposed to rain the correct siting is; distant from direct sources
( radiators, direct lighting, etc...) and protected from direct sunlight and draughts. Air circulation must be
freely maintained around the condensing unit, be it integral or remote. In observance of these specific
conditions will detrimentally affect the cabinet. nsure that in respect of the dimensions, the space
reserved for the equipment permits its correct utilisation and ease of maintenance. After carefully
unpacking the display case, remove the white PVC protective film and all of the manufacturer's material
which safeguards the item in transit. Place the cabinet on a flat surface and level it by screwing and
adjusting the leveling legs to ensure its efficient operation. The cabinet must be lifted only from the
exterior of the base to avoid the possibility of damage. Do not move the cabinet by application
of pressure to the surface. if the device has been positioned horizontally ( integral condensing unit ).wait
two hours before activating it. Packing and protective film
should be disposed off as indicated by the local authorities.
The equipment must not be installed within explosive
amblence, In the open air or exposed to rain the correct
siting is; distant from direct sources ( radiators, direct
lighting, etc...) and protected from direct sunlight and
draughts. Air circulation must be freely maintained
around the condensing unit, be it integral or remote.
In observance of these specific conditions will
detrimentally affect the cabinet.
≥
50cm