ATOS Worldline
-
Technologies & Products
Page:
20/55
DEP/T6 Owner's Manual
(
04.01
)
Classification:
Public
3.
Select the function
Contrast.
The
LCD Setup Contrast input
scre
en appears.
LCD S
etup
Contrast
056 %
Ok
4.
Adjust the value in the input spin box.
This value reflects the relationship between the minimum and the maximum
voltage used for the polarisation of the crystals. Lowering the value decreases
the contrast, increasing it results in more contrast.
5.
Press
Ok
to validate the new setting.
For details on changing the values in a spin box, refer to the section
Changing values
in a spin
box on page 17.
2.4.8.2. Setting the backlight power saving feature
To maximize the lifetime of the LCD display, you can enable the
Backlight Power
Saving
feature. This feature has the display fade away after a certain period of
inactivity.
You can switch the feature on or off and, when it is enabled, you can determine the
duration of the inactivity period.
To switch the
Backlight Power Saving
feature on or off, carry out the following
procedure.
1.
Open the
Hardware Setting
menu.
The path to follow is:
System Management
> (
Identification
)
System
Configuration
>
Hardware Setting
2.
Select the function
LCD Setup.
The
LCD Setup
menu s
creen appe
ars.
LCD Setup
1 Contrast
2 Backlight Power Saving
3 Backlight Pwr Sav Time
Ok
3.
Select th
e function
Backlight Power Saving.
The
Backlight Power Saving
options menu appears.
