Atop Smart Security Server
IS150
User Manual V1.0
31
4.4.5 SNMP Settings
The SNMP is used by network management software to monitor devices in a network to retrieve
network status information and to configure network parameters. The SNMP Settings shows the
configuration of this device so it can be viewed or edited by third-party SNMP software as shown
below, Figure 4.19.
Figure 4.19
IS150 provides two SNMP fields, which are
“System Contact”,
usually used to specify the device’s
contact information in case of emergency; and
“System Location”,
usually used to specify the
device location.
If you wish to make the device information available for public viewing/editing,
Enable
the SNMP
function. Fill in the passphrase for the
“Read Community”
, the group that is allowed to read the
device information and fill in the passphrase for the
“Write Community”
, the group that is allowed to
read/modify the device information. By default IS150 comes in
public
for
Read Community
and
private
for
Write Community
.
