Atop Smart Security Server
IS150
User Manual V1.0
19
whether there are neighbors with a name matching yours (this is done for preventing any conflict
over networks).
At this point you may decide to change other settings such as the
Wireless Mode,
whether to
have
Automatic Channel Selection,
the
Bandwidth, Transmission Rate
and the
Secondary
Channel
(only available when on
802.11a/n
and
802.11b/g/n
modes).
Next go to
Security Settings,
and on
Security Mode
choose which security protocol will be
used in the network. We strongly recommend not leaving this section as disabled.
Click
“Apply”,
and wait for the changes to take effect. This will apply all the previous changes
all together.
4.2.2 AP Client Mode
This mode allows your IS150 to connect to an Access Point (
AP). Ethernet clients
connected to
IS150 over the Local Area Network (LAN) are allowed to access the network throu
gh IS150’s wireless
interface.
Figure 4.4
Its corresponding complete menu-tree is as follows in Figure 4.5.
