User manual Version 1.1
ABLELink
Serial-Ethernet Server
GW51W-
MAXI
Copyright © 2003 Atop Technologies, Inc.
2. Nomenclature and Settings
2.1 Nomenclature of GW51W-
MAXI
Components
Figure 2.1 shows the names of GW51W-
MAXI
components. In the figure, the indicated switch settings
represent factory settings.
LED Indicator
Serial Port Mini-Din
Connector
Serial Port
Terminal Block
Connector
Power Supply Input
Connector
Antenna
Mini-Din Pin
Assignment
Mode Switch
Table
Mode Switch
Figure 2.1. Nomenclature of GW51W-
MAXI
Components
2.2 MODE Switch
This sets or initializes the operating mode for the GW51W-
MAXI
.
The factory default setting is that Switch 1 (SW1) and Switch 2 (SW2) are set to OFF. You can use the
Mode switch to change the operating mode from the factory default settings to your desired mode.
GW51W-
MAXI
can be setup either RS-232, RS-485, RS-422 or Console configuration mode by MODE
Switch.
SW1
SW2
Mode
OFF RS-232
OFF
ON CONSOLE
OFF RS-485
ON
ON RS-422
All rights reserved. Designed in Taiwan.
8 / 63
