User manual Version 1.1
ABLELink
Serial-Ethernet Server
GW51W-
MAXI
Copyright © 2003 Atop Technologies, Inc.
B.2 Critical Issues of Upgrading
1. You can always abort the upgrading process by pressing the
<Esc>
key from host PC during the
upgrading process. GW51W-
MAXI
will restart automatically and the system remains intact.
2. If GW51W-
MAXI
does not receive any upgrading data within
30 seconds
, GW51W-
MAXI
will restart
automatically and the system remains intact.
3. After the upgrading process finishes, GW51W-
MAXI
will program the flash memory and buzzer beeps 6
times then restarts. Normally, it takes around 10 seconds to complete the programming process. If an
error occurs during the programming process, GW51W-
MAXI
will clear the corresponding memory and
the system remains intact of what it was.
B.3 Error Messages
Firmware upgrade may not be successful if errors occur during the process.
Error Cause
Message
Illegal Hex file format
Hex File Text Error
Hex File Check-Sum Error
Hex File Format Error
Hex File End of Record Error
GW51W-
MAXI
handshaking problem
GW51W-
MAXI
ACK Start Address Error
GW51W-
MAXI
ACK Length Error
GW51W-
MAXI
Response Command Error
Configuration file
Remote IP not found
Open configuration file failure
All rights reserved. Designed in Taiwan.
58 / 63
