Atop ABLELink GW21 MAXI Series Programming Manual Download Page 66

Page: 66 / 110

SDK Programming Guide Version 1.511

ABLELink

Ethernet-Serial Server MAXI Series

pbuf

the pointer of data buffer to be sent out

Return Value:

SUCCESS successful
others error, the definition of ERROR number please refer to the file
“

tcpdef.h

”

Example:

send data to the specific node (IP address: 10.0.52.100; port number:

0x1234).

ulong remoteIP

= 0x6434000a; // IP addr = 10.0.52.100

ushort remotePORT

= 0x1234;

main()

{

udp_open( &handle )

udp_send ( handle, remotePORT, remoteIP, buf, len);

processing

}

Remarks:

This function is used to send data to the destination node. The maximum
data length is 1460 bytes.

udp_reset()

Description:

Release all of the UDP ports.

Include:

tcpapi.h, tcpdef.h

Usage:

int udp_reset ()

Input Parameters:

Return Value:

SUCCESS successful
others error, the definition of ERROR number please refer to the file
“

tcpdef.h

”

Example:

Close all of the UDP channels

udp_open ( handle1 );

udp_open ( handle2 );

udp_reset ( );

wait ( 5 );

// wait for 5 seconds for garbage collection

Remarks:

This function is used to close all of the UDP communication channels

Summary of Contents for ABLELink GW21 MAXI Series




































































































Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews:

Atop ABLELink GW21 MAXI Series, Programming Manual, Page: 66 / 110

Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews: