Atop ABLELink GW21 MAXI Series Programming Manual Download Page 107

Page: 107 / 110

SDK Programming Guide Version 1.511

ABLELink

Ethernet-Serial Server MAXI Series

Broadcast IP

Except for the default IP 255.255.255.255, other items (IPs) are read from the file

“seg.cfg”. This field specifies a detecting IP range. It may be a designated IP or a
broadcast IP.

Wishes

Specifies minimum number of the devices you wish to get reply from after sending

Invite

request. If there is not as many as devices responded to your invitation,

the system repeatedly sends invitation until your request is fulfilled.

Reply

Indicates the actual number of controllers or devices this utility program detected.

Retry

Specify the number of times that an Invite request be re-sent.

Locate

Locate the specified controller.

Reset

Reset the selected controller or device.

Config

Configure the selected controller or device.

Exit

Exit this utility.

IP Address

Indicate the IP address of the controller or device that replied to your request.

Leading tag “!”: Stands for IP address collision. Possibly caused by duplicated

IPs on the network.

Leading tag “?”: Stands for Mac address collision. Possibly caused by

duplicated Mac address on the network.

MAC Address

Indicates the detected Ethernet MAC address of responding controller or device.

Gateway

Indicates IP address of the TCP/IP gateway.

Subnet Mask

Indicates the TCP/IP network mask.

Indicates the OS version of the responding controller or device.

AP Version

Indicates the AP version number of the responding controller or device.

Model

Indicates the model number of the responding controller or device. This field is only

available for monitor.exe version 2.0 and above.

D.2 Detecting Operational Controllers and Devices

You may do the following steps to detect controllers or devices that currently active on the network.

1. Start

monitor.exe

utility program.

Select an item from the

Broadcast IP

list.

Specify a number in the

Wishes

box.

Click on the

Invite

button. This will display all the controllers and devices information you have

requested.

Summary of Contents for ABLELink GW21 MAXI Series




































































































Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews:

Atop ABLELink GW21 MAXI Series, Programming Manual, Page: 107 / 110

Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews: