ATON Storm A53W, User Manual

Page: 12 / 20

10 ©2007 • All rights reserved.
Storm Series LCR Theater Speakers
Mounting Speakers in Ceiling (Pre-Construction or Retro-Fit)
1. Remove speaker grille and place speaker face down.
2. Locate the speaker wire and pull through the ceiling opening.
3. Connect the speaker wire. BE SURE TO OBSERVE CORRECT POLARITY!
4. Insert the speaker into the opening in the ceiling (or Rough-in Bracket opening) and care-
fully tighten each of the four clamping screws, alternating diagonally between each screw
position to ensure proper fi t.
5. Once the speaker is mounted in the ceiling, twist the baffl e to aim the mid-range driver at
the listening area. See
Pointing the Mid-Range for details.
6. Aim the pivoting tweeter at the listening area.
7. Set the Treble and Bass switches. See Setting Switches for details.
8. Replace the speaker grille.
Figure 3.11: Mounting Speaker In Ceiling