background image

 

© 2007 • All rights reserved.                                                                              1

Storm Series LCR Theater Speakers

1. Introduction

Thank you for choosing ATON Storm Series LCR Theater Speakers. Available in ceiling-mount 
and in-wall confi gurations, each model was voiced in our sound labs by musicians with years of 
critical listening experience and crafted for your listening enjoyment. To see the complete line of 
ATON products, visit us online at 

www.atonhome.com

.

Storm Series 

LCR Theater Speakers are timbre-matched and designed to work together in any 

combination of left, right, center or rear surround in order to create the perfect home theater 
environment regardless of a room’s size or shape.

  

Storm Series

 LCR Theater Speakers also make excellent whole-house audio solutions that are 

ideal for areas with defi ned listening areas. Designed to blend with any home environment, both 
models feature fl at, unobtrusive profi les, paintable mesh grilles and sleek perimeter trims.

All Storm Series speakers are designed for indoor and outdoor use and carry a limited lifetime 
warranty. Pre-construction brackets are available for easy, reliable installation.
 

 

Figure 1.1: A83C & A53W Front View

+

-

Figure 1.2: Speaker Terminals

Summary of Contents for Storm A53W





















Reviews: