Secure the prop using the 10mm rubber tubing and lock nut. NOTE: Do not over tighten!
Be very carefull when handling the propellor on any model boat. Be sure to disconnect
the battery first.
Secure the hatch by sliding the front tabs into the slots at the front of the hull opening. The
hatch should drop in easily so that the hatch pins seat into the holes in the hull.
Push the pins down with your thumb and rotate them until they lock in place.
12
STEP 11
STEP 12
1
2
3
PRO TIP:
Always inspect the edges of the prop for damage. Keep the edges sharp and clean
for maximum performance.
Summary of Contents for A.R.C. C1
Page 1: ......
