background image

11

ATOMIKRC.COM

18010

Warranty & Warnings

Keep the packaging and instruction manual as they contain important information.

Always check your model for loose screws and components before operating. 

Always unplug the battery in the model before removing debris that may have become 

tangled in the prop.

The controller's range will vary depending on your surroundings and battery strength. Do not 

operate too far away or control will be lost.

Ensure that all batteries are correctly installed and that the 11.1V LiPo battery is fully charged.

Do not touch moving parts during operation, especially the prop.

Some of the electronic components may become very hot during use and can severely burn you if 

touched before they cool. Let the model stand and cool down before handling the motor, ESC and 

cooling components.

If you lose control of your model, never wade into the water with strong currents to retrieve it. First, 

hold the transmitter as high as you can and try to re-establish control. If this does not work, find 

another way to move closer to the model, but do not endanger yourself in the process.

GENERAL WARRANTY POLICIES

Atomik RC warrants this product to be free of material and workmanship defects when new. Atomik 

RC will at its sole discretion repair or replace defective components free of charge within 90 days 

from date of purchase or within 30 days for all electronic components.  This warranty does not cover 

wear and tear, crash damage, modifications, failure to perform routine maintenance, or any damages 

arising as a result of improper use. All warranty claims are to be directed to Atomik RC Customer 

Service at 1-800-705-0620 (208-762-0620).

GUARANTEE

All products are inspected and adjusted individually before leaving the manufacturer and are 

guaranteed to be free of material defects and manufacturing faults.

IMPORTANT NOTICE

Atomik RC assumes sole responsibility for our products; therefore, dealers should not be involved in 

any warranty issues.  All warranty claims are to be directed to Atomik RC Customer Service. Before 

returning any defective product, please contact Atomik RC Customer Service at 800-705-0620 

(208-762-0620)  to receive a Return Merchandise Authorization Number.  A dated & itemized sales 

receipt must accompany any product returned for warranty work.

RELEASE OF LIABILITY

Atomik RC, its affiliates, manufacturers, distributors, or retail partners shall not be held liable for any 

accident, injury to persons, or damage to property resulting from use, misuse, or abuse of any Atomik 

RC product. In purchasing a Atomik RC product the user agrees to accept responsibility for all such 

risks.

This appliance is not intended for use by persons (including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a person responsible for their safety.

Summary of Contents for 18010

















Reviews: