AC Power
Please use the attached power, note that power voltage and frequency are the same as the mar-
ked voltage and frequency of device when connecting power. Every device’s power should be con-
nected separately, so that device can be controlled individually.
Cable spec.
：
Cable(EU)
Cable(US)
Pin
International
Brown
Black
Live
L
Light blue
White
Neutral
N
Yellow/Gree
n
Yellow/Gr
een
Earth
Overhead Rigging
DMX-512 connection
Connection between laser lights and DMX must use the shied cable of diameter more than
0.5mm. Please use the attached 3 pin XLR plug/socket to connect the DMX output/input inter-
face. The connection between socket and cable as below( note the plug/socket‘s 3 pin number
and position).
Note, XLR plug/socket‘s 3pin can not be touched by inner hull, connection between pins is not allo-
wed. Except above connection, XLR plug/socket can not be connected with XLR control line.
Device receives international standard DMX512(1990) control signal.
When using standard DMX512 control signal, the last devi-
ce‘s output interface must
be connected to a DMX plug. This plug is putting a 120
ohm resistance between
“canon” plug‘s 2 pin and 3 pin. Showing as below pic.
Sticking this plug into the
last device‘s signal output interface, it will avoid the in-
terference during the pro-
cess of signal transmission.
