Aut3
Laser + Strobe show
Aut4
LED show
Aut5
Laser show
Aut6
Strobe show
S.1-S.99
Program speed adjustment
Sou0
Mix sound show
Sou1
LED + Laser show
Sou2
LED + Strobe show
Sou3
Laser + Strobe show
Sou4
LED show
Sou5
Laser show
Sou6
Strobe show
SLAV
Slave mode
d001
Signal reception mode (the worlds will stro-
be if there’s no signal)
02CH/11CH
DMX channel selecting
001-XXX
Channel address setting
LEDS
LED display power-saving mode.
Digital tube will display a point if there’s
no operation in 30s; press any button
or IR remote control to activate it.
TEST
Testing mode
：（
1
）
functional testing
mode: auto/sound program, testing for
30s; when there’s sound, running sound
program; when no sound, running auto
mode; to check if the LED chips are OK. And
the IR remote control testing, press
ON/OFF, blackout operation, to check if the
IR remote control is OK.
（
2
）
Aging testing: all the LED chips, motor
work at the max. power, LED display shows
8.8.8.8.
REST
Restore the factory initial setup and restart.
