© 2012 Escalade Sports
For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
STEP 6:
Peel the protective coating off
P12
Playfield Trims, then peel the adhesive strip protective film off the underside
of
P12
Playfield Trims. Turn them over and carefully place them along
P1
Side Aprons as shown in
DETAIL B
and
FIGURE 6
.
PARTS REQUIRED:
2 pcs -
P12
Playfield Trim
FIGURE 6
DETAIL B
Peel and Turn Over
STEP 7:
Place
P4
Playfield with graphics
facing down onto the main cabinet.
Align
P4
Playfield holes with
P12
Playfield Trims holes and attach
using
H5
Screws as shown in
FIGURE 7
.
Tighten, but
do not strip out H5
Screws.
PARTS REQUIRED:
18 pcs -
H5
Phillips Washer
Head Screw
1 pc -
P4
Playfield
P12
P12
P1
FIGURE 7
Graphic
facing down
H5
IMPORTANT NOTE:
P4 Playfield must be evenly
spaced on top of both ends
of P6 Goal End Board - at each
end of cabinet assembly.
P1 Side Aprons may be slightly
warped. Please keep P1 Side
Aprons pushed in tight against
the P4 Playfield for correct assembly.
All screws must be screwed
STRAIGHT down.
P4
P6
P6
NOTE:
Adhesive
strip this side.