© 2012 Escalade Sports
For Customer Service Call 1-888-996-2729
10
All Rights Reserved.
STEP 8:
Attach
P18
Plastic Brackets onto the back side
of
P2
End Apron using pre-drilled pilot holes
with
H4
Screws as shown in
FIGURE 8
.
Tighten, but do not strip out H4 screws.
NOTE:
Be sure bottom edge of
P18
Plastic
Brackets is flush with bottom edge of apron.
Attach
P8
Top Goal Box and
P9
Bottom Goal
Box onto the back side of
P2
End Apron using
pre-drilled holes with
H4
Screws as shown in
FIGURE 8
.
Tighten, but do not strip out H4 screws.
Repeat procedure for second assembly.
PARTS REQUIRED:
20 pcs -
H4
Phillips Round Head Screw
2 pcs -
P8
Top Goal Box
4 pcs -
P18
Plastic Bracket
2 pcs -
P2
End Apron
2 pcs -
P9
Bottom Goal Box
FIGURE 8
P18
P18
H4
H4
H4
P2
P9
P8
STEP 9:
Attach previous assemblies from
STEP 8
to the end of table cabinet using pre-drilled pilot holes with
H7
Screws
as shown in
FIGURE 9
.
Tighten, but do not strip out H7 screws.
Install
H4
Screws into previously installed
P18
Plastic Brackets as shown in
FIGURE 9
.
Tighten, but do not strip out H4 screws.
PARTS REQUIRED:
8 pcs -
H4
Phillips Round Head Screw
12 pcs -
H7
Phillips Flat Head Screw
H7
H7
STEP 8
Assembly
C2
H4
H4
STEP 8
Assembly
P5
P18
FIGURE 9
NOTE:
Ball Opening
in
P2
End Apron
must be in this
position.
NOTE:
Opening of
P9
Bottom Goal
Box must be in this position.