© 2012 Escalade Sports
For Customer Service Call 1-888-996-2729
13
All Rights Reserved.
PARTS REQUIRED:
6 pcs -
H6
Phillips Flat Head Screw
2 pcs -
P10
Scorer
8 pcs -
P16
Rod Handle
4 pcs -
H8
Zinc-Phillips Flat Head Screw
8 pcs -
P15
Rod End Cap
2 pcs -
P17
Ball Entry Cup
STEP 13:
Attach
P10
Scorers onto the top of
P5
End Top Rails using
H8
Screws as shown in
FIGURE 13
.
Tighten, but do not strip out H8 screws.
Attach
P15
Rod End Caps to the rod as shown in
FIGURE 13
.
Slide
P16
Rod Handle onto each rod end with the small hole shown in
FIGURE 13
.
IMPORTANT NOTE: A small amount of liquid soap applied inside each P16 Rod Handle will allow them to
slip onto rod easier.
Attach
P17
Ball Entry Cups onto
P1
Side Aprons using
H6
Screws as shown in
FIGURE 13
.
Tighten, but do not strip out H6 screws.
FIGURE 13
H8
P10
P15
P16
H6
P17
P1
THIS STEP REQUIRES FOUR OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
Note:
Small
Hole