Atomic FASTWALL Installation Instructions Download Page 1

Page: 1 / 3

Questions about ATOMIC products? Give us a ring! 717-626-4408

www.atomicdesign.tv

STEP ONE

Slide two FASTwall panels together to create

one unit.

STEP TWO

Align desired width of bases in a row, with white

feet facing the ground. Be sure that the handle

holes are all aligned to the back of the FASTwall.

When aligning bases, place one more base that the

width of the FASTwall.

i.e. 5 units wide = 6 bases,

7 units wide = 8 bases, etc.

STEP THREE

Insert C3 connectors into middle holes as

illlustrated. Connect FASTwall bases using

F2 connectors.

NOTE:

If building FASTwall Columns, connect FASTwall panels using F2 connectors as shown.

Page 1 of 3

RENTAL

SOLUTIONS

FASTWALL

INSTALLATION INSTRUCTIONS

Summary of Contents for FASTWALL

Page 1: ...e handle holes are all aligned to the back of the FASTwall When aligning bases place one more base that the width of the FASTwall i e 5 units wide 6 bases 7 units wide 8 bases etc STEP THREE Insert C3...

Page 2: ...TEP FOUR Connect risers to bases using C3 connectors and C2 connectors on each end NOTE Connecting C4 connectors to each riser as it is placed makes the following steps easier If adding interior light...

Page 3: ...LUTIONS FASTWALL INSTALLATION INSTRUCTIONS STEP SIX Continue building FASTwall one row at a time Finish top row with C2 connectors DISASSEMBLY INSTRUCTIONS FASTwall MUST be disassembled from top down...