background image

17

 

Risk Level 

is used to add more conservatism 

to the STANDARD decompression algorithm. 

STANDARD is the basic setting yielding 
the longest no-decompression limits.

MODERATE is slightly more conservative 
than standard.

CONSERVATIVE is the most conservative 
setting and has the shortest no-decompression 
limits. 

Exertion Level

 is set to the planned exertion 

level for the dive. Setting the exertion level 
to high increases the conservatism of the 
algorithm (shortens no-deco times).

Safety Reserve

 sets the tank pressure with 

which you wish to return to the surface. This 
is used in diving by the Gas Time Remaining 
calculation, which shows the time you can 
remain at a depth while still returning to the 
surface with this reserve pressure, after making 
all deep, decompression, and safety stops. 

Dive Settings

Main Menu

Settings Menu

Alerts

 will remind you 

during a dive when a 
particular preset event 
occurs. 

Two independent

 Low 

Gas Alerts

 can be set.

Max Depth Alarm

 can 

be set to sound if a set 
depth is exceeded.

Alerts can be both visual 
and audible (ON), visual 
only (SILENT), or (OFF). 

Visual alerts will flash 
the relevant part of the 
dive display.

     WARNING:

Although the risk is very small, 
no decompression algorithm 
can eliminate the risk of 
decompression sickness. 
More conservative settings will 
help reduce risk even further.

Summary of Contents for COBALT 2

















































Reviews: