33
Other Dive Screen
Alerts and Warnings
Ascent Rate SLOW!
If your ascent rate exceeds 30 feet per minute for
longer than 10 seconds, the Ascent Warning sounds
and flashes SLOW! Stop and slow your ascent!
Gas Time and Low Air
The Gas Time will flash and sound an alert if the gas
time remaining is two minutes or less. This is the
time you can remain at the current depth, and still
allow for a safe ascent to the surface, making all
stops, and arriving with your preset safety reserve.
The Tank Pressure will flash (and sound, if the audio
alert is turned on) when it becomes less than the
user preset alert pressure.
PO2
The PO2 will flash and an alert will sound if the
value exceeds either the limit set in the Gas mix Edit
Screen or the maximum allowable (1.6).
Depth
The depth will flash if it exceeds the depth in
the alert setup or the maximum operating depth
(330 feet or 100 meters).
Ascent Rate Alert
(Slow your ascent!)
Flashing Depth Alert
(Ascend to shallower
depth!)
Flashing Low Air
or Gas Time Alert
(Ascend to
shallower depth!)
Flashing PO2 or CNS
Alerts. PO2-(Ascend
to shallower depth!)
CNS- Alerts you if
you reach 80% or
more (Ascend and
terminate dive!)
User set Low Gas
and Max Depth Alerts
can be both visual
and audible (ON),
visual only (SILENT),
or (OFF). All others
are both visual and
audible and cannot
be turned off.
