3
4. Symbols of international standards (IEC)
Symbol
Title and indication
stand-by or preparatory state for a part of equipment
This symbol indicates that the unit is in standby, or a part of the unit is in a preparatory state.
Manufacturer
This symbol indicates the name and the address shown adjacent to the symbol is of the manufac-
turer.
Date of manufacture
Indicates the date when the unit was manufactured in the factory.
Authorised representative in the european community
This symbol indicates the name and the address shown adjacent to the symbol is of the authorised
representative in the European Community.
WEEE symbol
In the EC area, an electrical and electronic product falling in one of the categories specified by
“DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27
January 2003 on Waste Electrical and Electronic Equipment (WEEE)” should be disposed of in a
manner consistent with relevant laws and regulations.
This symbol indicates that the above-mentioned requirement applies to this product.
Class II device
This symbol shows that the device is categorized into class II device in terms of protection against
electric shock.
5. Other symbols
Symbol
Title and indication
Operation
This symbol is used to indicate that the user has increased the light intensity.
Operation
This symbol is used to indicate that the user has reduced the light intensity.
