Operation Manual
Page 10
ATO Aviation Inc.
5.
SYSTEM FUNCTIONS
5.1.
EQ-Link
The EQ-Link is the heart of your headset system that wirelessly connects the
EQ-1 headsets and provides the interface for your radio and communications
system.
The EQ-Link must be plugged into an intercom system and will power on when
your aircraft
’s communication system is energized.
5.2.
EQ-Link Pairing
The EQ-Link has been paired at the factory with the supplied EQ-1 headset.
No other adjustments are required.
However if you wish to pair a headset to a new EQ-Link:
Enter Advanced menu mode and select "pairing" from the advanced menu
settings (refer to the flow chart section 10.1)
Power the EQ-Link. Either plug the link into your intercom inputs in the aircraft
or by plugging the mini USB charging cable in an appropriate power source
(USB port on your P.C. or supplied 12 volt adapter)
Ensure that the EQ-Link that you wish to pair to is set to Master.(
see P13
)
The headset should then detect the EQ-Link and announce the last 4 digits of
the serial number of EQ-Link. This serial number can be found on the back to
the EQ-Link. If this is the correct unit as indicated in the headset then press
the button on the headset to confirm.
Your headset is then paired to this EQ-Link and will only link to this unit when
in "Link" or "passenger" mode.
Summary of Contents for EQ-Link system
Page 1: ...EQ LINK SYSTEM EQ1 WIRELESS AVIATION HEADSETS ...
Page 2: ......
Page 4: ......
Page 8: ...HF 90M Installation Operation Guide Page 2 ATO Aviation Inc ...
