ato form Starlight Flex, User Manual

Page: 13 / 24

Page 13/24 (37/21)
Assembly and adjustments
10 Assembly and adjustments
10.1 Basic model
The Starlight
®
Flex head protection is de-
signed in such a way that it can be adjusted
to the individual dimensions of the user at
different points.
The following basic adjustment options are
available:
•
Length of the ear straps
• Inclination of the ear straps
• Head circumference
• Upper side
The head protection is stabilised and held in
its shape by the connection of the outer ring
with the padding-inlet.
To adjust your head protection, the pad-
ding-inlet must be loosen in the front area
of the outer ring first for all adjustment
options.
Setting the length of the ear straps
and the ear cut-out
To adjust the length of the ear straps (3),
detach them from the Velcro connection
with the outer ring (1). Stagger the ear
straps according to the required length
according following steps.
1. First fix the position of the straps at the
inner side of the outer ring and...
2. and then fix this position on the outside
with the Velcro.
Inclination
You can adjust the inclination of the head
protection or the ear straps via the ear
straps as described above by only adjusting
the straps slightly at the front or back.
1.
2.
1
3
Fig. 2: Picture shows setting with standard ear
straps