ATN OTS-X Series, Operator'S Manual

Page: 33 / 40

3-9
3. RCA style video cables
FIGURE 3.9. RCA CABLES
Connection Setup:
1. Connect the 8 PIN-to-BNC (Figure 3.7.) cable to the sights
8 PIN port.
2. Connect the BNC Plug to RCA Jack Adapter (Figure 3.8.), to the
8 PIN-to-BNC cable.
3. Connect the Yellow (video) plug of the RCA Cables (Figure
3.9.), to the RCA jack adapter.
4. Connect the opposite end of the yellow male RCA cable to the
monitor’s yellow RCA plug.
Operation:
1. Turn on the system by pressing the POWER button.
2. Let screen image settle before transferring video to the monitor.
3. Press the “Up” and “Down” (Figure 3.2.)arrow buttons simulta-
neously, as show in the photo above. The Video image will now
be able to be viewed through the OTS-X eyepiece and the moni-
tor at the same time.
The user, while looking through the OTS-X eyepiece, will be able to
tell if video is being displayed on the monitor, because the VID icon
will be visible in the bottom left corner of the eyepiece.
4. To turn off the Remote Video Output, repeat step 3.