2
ApplicATion
ATn Aries mk350 “guardian”
is the best 1
st
generation riflescope on the market.
We started by improving the optical configurations with lowered F-stop factors (from 1.7 on
previous models to 1.4(!) on new) and optical resolution that is beyond current military stand-
ards. this provides you with the brightest and clearest image in a 1
st
gen unit. then we added
our precision “red on green” aiming system, easy push button operation, reticle brightness
adjustment and our detachable, most powerful in the industry 450mw Infrared Illuminator with
dedicated windage and elevation adjustments.
FeATures
• Top-of-the-line First Generation weapon sight
• High resolution Gen. 1+ IIT
• “Red on Green” reticle system with 1/4 inch @ 100 yards adjustment
• 2,5X magnification with F:1.4, f90mm lens
• Detachable most powerful in the industry 450mW Infrared Illuminator with dedicated
windage and elevation adjustments.
• Adjustable fixation rail mounting system
• One 3V Lithium battery, CR123A type
• Dimensions: 275 mm x 105 mm x 83 mm /10,8” x 4.1” x 3,2”
• Weight: 1.27 kg /2.8 lbs
* ATN reserves the right to change the above specifications at any time without notice
prepArATion For operATion
Before getting started make sure to follow these steps:
• Install the battery into its housing with the polarity
order shown on the main body of the unit.
• Switch on the Aries scope by pushing the master
power button. the protective lens cover must be
attached to the lens.
• Make sure that the green luminance of the light
intensifier tube is present.
• Observe the scene, and adjust the diopter and/or lens for optimal image clarity.
• You may now enter a dark environment or simply shut the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter.
• Observe the scene, and adjust the front lens for ideal focus.
• Finally, you may want to turn the infra red (IR) illuminator on. Notice the ability of the Aries
scope to see in total darkness with the aid of the Ir illuminator.
operATing
mounTing
1. Slightly loosen the horizontal and vertical fixing screws on the 7/8” weaver rail built into the
scope.
2. place the scope on the dovetail mount of the fire arm making certain that the mount aligns
with the receptor attachment screw groove. Adjust as necessary.
3. tighten the horizontal fixing screws.
NOTE:
Receptor attachment screws may need to be tightened after continuous shooting.
BAttery InStALLAtIOn
