1.4.2 Power On/Off
Power On: Press and hold backlight button E for 3 seconds, or connect MISSION2 to the
charging cable.
Power Off: Press and hold button E for 3 seconds while in watch mode.
1.4.3 Charge & Save Battery
Please make sure the charging points are clean and dry. Moisture and dirt can seriously
affect charging efficiency and may cause damage. Please use a power adapter with safety
certification (rated voltage: DC 5V/2A)
※
Do not use connectors or fast chargers that exceed the rated voltage: DC 5V/2A. It will
affect the lifespan of the battery.
Please ensure the charging cable is properly connected when charging. If the charging position is not
aligned, it may result in an improper connection and cause the watch to overheat. It takes 2 hours to
full charge, and the screen will display 100%.
※
The lithium battery in MISSION2 can be damaged if not fully discharged. MISSION2 has an
internal protection mechanism which will disconnection the battery before it is fully
discharged. However, a small amount of discharge will still occur. If it is left unused for a
long time without charging, the lithium battery will likely to be fully discharged or have a
shorter lifespan.
To avoid battery damage, please do the following:
※
Please power off when not in use, and fully charge it every two months to maintain
battery health
※
If it is powered off for too long, the first charge will take 2-3 hours to preserve the
battery,
※
Avoid direct sunlight or left in vehicles exposed to sunlight.
1.5 App pairing and unpairing
Using the ATMOS App to sync the dive and activities log and other status
Download ATMOS App:
