Atmos 313.0000.B Operating Instructions Manual Download Page 3

Page: 3 / 28

1.0 Introduction

1.1 Notes on operating instructions

These operating instructions contain important notes on how to operate the ATMOS

A / C 161 /

261 Aspirator safely, correctly and effectively. Their reading helps to avoid risks, and also to reduce

repair costs and down-time. That increases, amongst other things, the reliability and service-life of

the device.

These operating instructions serve not only for new operating personnel to be instructed in its use,

but also for use as a reference manual.

These operating instructions must always be kept available near the device.

Care and safety inspections in conjunction with professional execution provide for operational safety
and readiness for use of your ATMOS

A / C 161 / 261 Aspirator and are therefore a must besides

regular cleaning.
Repair work and safety inspections may be carried out only by expert personnel authorised by
ATMOS. By applying only original spare parts you will have the guarantee that operational safety,
readiness for work and the value of your ATMOS

A / C 161 / 261 Aspirator will be preserved..

●

The product ATMOS

A / C 161 / 261 Aspirator bears CE marking CE according to the EC

guideline of the council for medical products 93/42/EEC and meets the basic requirements

of annex I of this guideline.

●

The product ATMOS

A / C 161 / 261 Aspirator complies with all applicable requirements of the

directive 2011/65/EC restricting the use of certain hazardous substances in electrical and

electronic equipment (“RoHS”).

●

The declaration of conformity can be obtained on our website at www.atmosmed.de.

●

The quality management system applied at ATMOS has been certifi ed according to international

standards EN ISO 9001 and EN ISO 13485.

●

Prior to start-up please peruse chapter 2.0 „For your safety“, in order to be prepared for any

possible dangerous situations.

●

These operating instructions correspond to the design of the ATMOS

A / C 161 / 261 Aspirator and

the status of basic safety engineering standards on going to press.

●

Reproduction of these instructions – even in part – only with the written permission of ATMOS.

●

Subject to alterations and changes.

Please store this document near the device for later use!

• ATMOS

C 161 Aspirator / DDS

REF 313.0000.0

with 1l DDS grad. secretion canister

• ATMOS

C 161 Aspirator / R

REF 313.0065.0

with 1.5l Receptal

canister

• ATMOS

C 161 Aspirator / M

REF 313.0002.0

with 1l Medi-Vac

canister

• ATMOS

C 161 Aspirator / S

REF 313.0004.0

with 1l Serres

canister

• ATMOS

C 261 Aspirator / DDS

REF 313.0100.0

with 1l DDS grad. secretion canister

• ATMOS

C 261 Aspirator / R

REF 313.0165.0

with 1.5l Receptal

canister

• ATMOS

C 261 Aspirator / M

REF 313.0102.0

with 1l Medi-Vac

canister

• ATMOS

C 261 Aspirator / S

REF 313.0103.0

with 1l Serres

canister

These operating instructions are valid for the following devices:

• ATMOS

A 161 Aspirator / DDS

REF 313.0200.0

with 1l DDS grad. secretion canister

• ATMOS

A 161 Aspirator / R

REF 313.0265.0

with 1.5l Receptal

canister

• ATMOS

A 161 Aspirator / M

REF 313.0202.0

with 1l Medi-Vac

canister

• ATMOS

A 161 Aspirator / S

REF 313.0203.0

with 1l Serres

canister

• ATMOS

A 261 Aspirator / DDS

REF 313.0300.0

with 1l DDS grad. secretion canister

• ATMOS

A 261 Aspirator / R

REF 313.0365.0

with 1.5l Receptal

canister

• ATMOS

A 261 Aspirator / M

REF 313.0302.0

with 1l Medi-Vac

canister

• ATMOS

A 261 Aspirator / S

REF 313.0303.0

with 1l Serres

canister

Summary of Contents for 313.0000.B





























Search results

Summary of Contents for 313.0000.B

Reviews:

Related manuals for 313.0000.B

Brands by name

Popular brands

Atmos 313.0000.B, Operating Instructions Manual

Search results

Summary of Contents for 313.0000.B

Reviews:

Related manuals for 313.0000.B

Brands by name

Popular brands