5
07
10
09
13
08
It is recommended that the appliance electrical
connections be tested once a year by a qualified
technician.
Run the water flow for
one minute to check for
leakage before connecting
to power.
Reattach the front cover of the heater
and secure it with 4 screws and then
slide the bottom gray cover
Connect the power cable to the
terminal block.
Caution: The heater must be
grounded.
Reference figure *3 on page 4 and
Electrical diagram on page 6
When installed outdoors,
the heater must be
placed in sealed
waterproof electrical box.
Make sure that the
appliance is filled with
water before connecting
power. (Repeat step 7)
11 12
Do not install the heater
where it may be subject to
direct sunlight.
