Atmel SAM W25 Xplained Pro [USER GUIDE]
42463A-MCU-06/2015
13
5.
Hardware Revision History and Known Issues
5.1
Identifying Product ID and Revision
The revision and product identifier of Xplained Pro boards can be found in two ways; through Atmel Studio or
by looking at the sticker on the bottom side of the PCB.
By connecting an Xplained Pro board to a computer with Atmel Studio running, an information window will pop
up. The first six digits of the serial number, which is listed under kit details, contain the product identifier and
revision. Information about connected Xplained Pro extension boards will also appear in the Atmel Kits window.
The same information can be found on the sticker on the bottom side of the PCB. Most kits will print the
identifier and revision in plain text as
A09-nnnn\rr
where
nnnn
is the identifier and
rr
is the revision. Boards with
limited space have a sticker with only a QR-code which contains a serial number string.
The serial number string has the following format:
"nnnnrrssssssssss"
n = product identifier
r = revision
s = serial number
The kit identifier for SAM W25 Xplained Pro is 2449.
5.2
Revision 2
Revision 2 of SAM W25 Xplained Pro is the initial released version.
