5.2.
Connecting a SAM-ICE to an Xplained Pro Board
Xplained Pro kits featuring a 10-pin 50mil debug connector can use external debug tools like SAM-ICE
™
or Atmel-ICE instead of the built-in EDBG. Devices using SWD interface on-board will have a connector
with the pinout compatible with the
You can connect the SAM-ICE to the debug connector on an Xplained Pro using either an Atmel-ICE
adapter, SAM-ICE adapter, or a 10-pin 50-mil header to squid cable. When using a squid cable, see the
table and figures below for how to connect the SAM-ICE to the Xplained Pro board.
Table 5-1. Squid Cable Connections
Squid Cable pin
SAM-ICE pin
1 (VCC)
1 (VTref)
2 (SWDIO/TMS)
7 (TMS)
3 (GND)
4 (GND)
4 (SWCLK/TCK)
9 (TCK)
5 (GND)
6 (GND)
6 (SWO/TDO)
13 (TDO)
7 (Not used)
8 (Not used)
9 (Not used)
10 (RESET)
15 (RESET)
Note:
1.
Optional, if the device has this functionality.
Figure 5-6. SAM-ICE using a Squid Cable
Atmel SAM G55 Xplained Pro [USER GUIDE]
Atmel-42389B-SAM-G55-Xplained-Pro_User Guide-04/2016
20
