4.3.
Getting Started with SAM D09
Due to the functional compatibility of the architecture and peripherals, SAM D10 firmware can be used for
SAM D09 with limited or no change.
Requirements
•
Custom board with SAM D09 device mounted. Refer Device datasheet for more details on
“Schematics and Programming ports”
.
•
Atmel Studio 6.2 or later
•
ASF version 3.27 or later
•
Atmel ICE Debugger to program/debug the device
Getting Started
1.
Launch Atmel Studio 6.2. Go to
File > New Project > GCC C Executable Project
.
Figure 4-5 SAM D09 New Project Window
2.
Select the device as
ATSAMD09D14A
from
Device Selection
window.
Atmel AT06467: Getting started with SAM D09/D10/D11 [APPLICATION NOTE]
Atmel-42362B-Getting-Started-with-SAM-D09-D10-D11_AT06467_Application Note-11/2015
12
