Figure 4-3 SAM D10 New ASF Example Project Window
7.
Open project properties (
Project > Properties or shortcut Alt+f7
).
8.
In Tool view (
Tools > Device Programming
), set the configurations – Tool (
mEDBG
), and Interface
(
SWD
).
Figure 4-4 SAM D10 Tool Selection Window
9.
Build the project:
Build > Build solution or shortcut F7
.
10. To load the code in the SAM D10 Xplained Mini and debug, select
Debug > Start debugging and
break (shortcut Alt + F5)
.
11. The application is programmed and the debugger breaks in main.
12. To run the code, select
Debug > Continue (shortcut F5)
.
Atmel AT06467: Getting started with SAM D09/D10/D11 [APPLICATION NOTE]
Atmel-42362B-Getting-Started-with-SAM-D09-D10-D11_AT06467_Application Note-11/2015
11
