Looking to take your design to the next level?
You have made the right choice in purchasing
the Atmel
®
QT600 Development Kit. It allows
you to demo Atmel button, slider and wheel
technology and add additional modules/boards.
The kit also to enables you to validate your
own design/board while leveraging the best
touch and microcontroller solutions available.
Introduction
1
Download the latest software
To get started, visit
http://www.atmel.com/qtouchsuite
and download four pieces of software:
•
Atmel QTouch Studio
®
(version 4.3 or later) - Visual .NET (version 3.5 or later)
•
Atmel AVR
®
Studio (version 4.18 or later) AND ALL Service Packs (SPx)
•
Atmel QTouch
®
Library (version 4.3 or later)
•
GNU Compiler – Download at
http://sourceforge.net/projects/winavr/files
The photo above shows three sets of boards (sensor board and corresponding microcontroller board):
•
QTouch8 with the ATtiny88
•
QTouch16 with either the ATXMEGA128A1 or the ATmega324
•
QMatrix 8x8 with either the ATXMEGA128A1 or the ATmega324
*UC3L MCU board in 2011
Atmel QTouch8
Atmel QMatrix 8x8
Atmel ATXMEGA128A1
Atmel QTouch16
Atmel ATtiny88
Atmel QT600 interface
Atmel ATmega324
Figure 1 – The Atmel QT600 Evaluation Kit includes these microcontroller and sensor boards
1
