Getting Started Guide for ATWINC1500 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42417A-Getting-Started-Guide-for-ATWINC1500WiFi-using-SAMD21-Xplained-Pro_UserGuide_032015
2
4
24
FAILED firmware download. The following information will be displayed on the command
window.
SAMD21 flashing script: please connect edbg and power up the board.
Firmware check OK
Chiperase completed successfully
Firmware check OK
Programming completed successfully.
Mode UART
Can not find image_builder path...
Downloading Image...
********************************************
* >Programmer for WINC1500 SPI Flash< *
* Owner: Atmel Corporation *
********************************************
>>Init Programmer
Detecting ports...
EDBG Virtual COM Port(COM4)
(APP)(ERR)[nm_bus_port_detect][567]Failed to find any COM ports
0 of ports found
(ERR)Failed To intilize programmer
Fail
#######################################################################
## ##
## ######## ### #### ## ##
## ## ## ## ## ## ##
## ## ## ## ## ## ##
## ###### ## ## ## ## ##
## ## ######### ## ## ##
## ## ## ## ## ## ##
## ## ## ## #### ######## ##
## ##
#######################################################################
If you see a failed message, you must check if your device is assembled correctly.
You must check the terminal program. Do not connect SAM D21 VIRTUAL COM PORT
via terminal program.
Retry firmware download again.
