Getting Started Guide for ATWINC1500 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42417A-Getting-Started-Guide-for-ATWINC1500WiFi-using-SAMD21-Xplained-Pro_UserGuide_032015
1
8
18
Open the SAM D21 EDBG DEBUG USB serial COM port, with the following settings:
115200 bauds
8 bit data
No parity
One stop bit
No flow control
Open a serial terminal tool to see the result. You can use your preferred serial terminal, such as PuTTY, Tera
Term, etc. You can also use terminal window plug-in in Atmel studio. You can install it through below menu.
(Menu → Tools → Extension Manager.)
Connect to the device.
The following information will be displayed on the terminal window.
-- WINC1500 weather client example --
-- SAMD21_XPLAINED_PRO --
-- Compiled: xxx xx xxxx xx:xx:xx –
Provision Mode started.
Connect to [atmelconfig.com] via AP[WINC1500_08:CA] and fill up the page.
3.5
Provisioning
As seen in the log message, the device is waiting for provisioning. In this stage, the ATWINC1500 device will
running as AP mode, waiting for user setup a credential for desired Access Point to use.
Some examples have this kind of provision function while some are not. It depends on the scenario of demo
purpose.
