AT91SAM-ICE User Guide
4-1
6206B–ATARM–04-Mar-08
Section 4
SAM-ICE Related Software
4.1
Overview
4.2
Free Software
Free software related to SAM-ICE ships with SAM-ICE and may also be downloaded from the web site:
No additional license is required to use this software.
4.2.1
JLink.exe (Command Line Tool)
JLink.exe is a tool, that can be used to verify proper installation of the USB driver and to verify the con-
nection to the ARM
®
chip, as well as for simple analysis of the target system. It permits some simple
commands, such as memory dump, halt, step, go and ID-check, as well as some more in-depths analy-
sis of the the state of the ARM
®
core and the ICE breaker module.
4.2.2
SAM-ICE TCP/IP Server (Remote SAM-ICE Use)
The SAM-ICE TCP/IP server allows using SAM-ICE remotely via TCP/IP. This enables you to connect to
and fully use a SAM-ICE from another computer. Performance is just slightly (about 10%) lower than
with direct USB connection.
Table 4-1. Available Software Packages
Software
JLink.exe
Free Command line tool with basic functionality for target
analysis.
SAM-ICE TCP/IP Server
Free utility which provides the possibility to use SAM-ICE
remotely via TCP/IP.
J-Mem memory viewer
Free target memory viewer. Shows the memory content of a
running target and allows editing as well.
SAM-ICE ARM
®
Flash DLL
An enhanced version of the JLinkARM.DLL, which contains
additional API functions for Flash programming.
RDI support
Provides Remote Debug Interface (RDI) support.
