AT91SAM-ICE User Guide
3-3
6206B–ATARM–04-Mar-08
At this point, the installation is complete. Click on the
"Finish"
button to dismiss the installation.
3.1.1
Verifying Correct Driver Installation
To verify the correct installation of the driver, disconnect and reconnect SAM-ICE to the USB port. Dur-
ing the enumeration process which takes about 2 seconds, the LED on SAM-ICE is flashing. After
successful enumeration, the LED stays on permanently.
Start the provided sample application
JLink.exe
.
JLink.exe
should display the build date of the
SAM-ICE firmware, the serial number, a target voltage of 0.000V if a target is not connected to SAM-ICE
and the speed selection. See the screenshot below
.
In addition to this you may verify the driver installation by consulting the Windows
®
device manager. If
the driver is installed and your SAM-ICE is connected to your computer, the device manager should list
the J-Link driver as a node below "Universal Serial Bus controllers" as shown in the following
screenshot:
