Figure 3-2.
Operating Mode Dialog
When selecting the Ad-Hoc mode you have to specify the ESSID and the Channel
parameters (Figure 3-3).
• ESSID: Select the ESSID of the Ad-Hoc network. All stations participating in the Ad-
Hoc network should have the same ESSID.
• Channel: Select the channel to be used. There are 14 channels available.
Figure 3-3.
ESSID and Channel Dialog
As soon as you have set your selections, press the “Next” button and a window appears
with a review of your installation settings. Please make sure that these values are the
desired ones. In case you have made a mistake you can always select the “Back” button
to make a correction. Press the “Next” button to continue with the installation, and finally
select the “Finish” button for the installation to be completed.
