Atmel AT32UC3A3128, Manual

Page: 841 / 1021

841
32072H–AVR32–10/2012
AT32UC3A3
31.6.8.3 Write Access
During a write access, the SR.XFRDONE bit behaves as shown in Figure 31-14 on page 841 .
Figure 31-14. SR.XFRDONE During a Write Access
31.7 User Interface
Table 31-7. MCI Register Memory Map
Offset Register Name Access Reset
0x000 Control Register CR Write-only 0x00000000
0x004 Mode Register MR Read-write 0x00000000
0x008 Data Time-out Register DTOR Read-write 0x00000000
0x00C SD/SDIO Card Register SDCR Read-write 0x00000000
0x010 Argument Register ARGR Read-write 0x00000000
0x014 Command Register CMDR Write-only 0x00000000
0x018 Block Register BLKR Read-write 0x00000000
0x01C Completion Signal Time-out Register CSTOR Read-write 0x00000000
0x020 Response Register RSPR Read-only 0x00000000
0x024 Response Register RSPR1 Read-only 0x00000000
0x028 Response Register RSPR2 Read-only 0x00000000
0x02C Response Register RSPR3 Read-only 0x00000000
0x030 Receive Data Register RDR Read-only 0x00000000
0x034 Transmit Data Register TDR Write-only 0x00000000
0x040 Status Register SR Read-only 0x0C000025
CMD line
MCI writeCMD Card response
CMDRDY flag
Data bus - D0
1st Block
Not busy flag
XFRDONE flag
The CMDRDY flag is released 8 t
bit
lafter the end of the card response.
Last Block
D0
1st Block Last Block
D0 is tied by the card
D0 is released