manualshive.com logo in svg

Atmal FPSLIC STK594, User Manual

Share
Download
Atmal FPSLIC STK594 User Manual Download Page 8

Using the STK594 Top Module

FPSLIC STK594 User Guide

2-3

2819D–FPSLI–11/04

2.3

Programming the 
AT94K Devices

The FPSLIC configuration process involves configuring the FPGA, the AVR

®

 program

code and the FPSLIC data memory. This configuration requires a single bitstream that
configures the FPGA, the embedded AVR Program SRAM and the FPSLIC Data
SRAM. The combined bitstream is automatically generated by the Bitstream Generator,
a System Designer software utility. 

After a reset and the internal clearing of the configuration data, the FPSLIC device self-
initiates configuration. The Master mode uses an internal oscillator to provide the Con-
figuration Clock (CCLK) for clocking the external EEPROM (configurator), which
contains the configuration data. After auto-configuration is complete, re-configuration
can be initiated manually by the user, if needed.

Note:

The AT94K devices also support Self-Programming. For more information on 
this topic, refer to the “Code-Self Modify” application note available on the Atmel 
web site.

Note:

The AT94K devices also support Cache Logic

®

 Configuration. For more infor-

mation on this topic, refer to the “Cache Logic Configuration” application note 
available on the Atmel web site.

For more details on programming procedures, refer to Section 4.10.

2.4

JTAG Connector

The JTAG connector is intended for the AT94K devices that have a built-in JTAG inter-
face. The pinout of the JTAG connector is shown in Figure 2-3 and is compliant with the
pinout of the JTAG ICE available from Atmel. Connecting a JTAG ICE to this connector
allows On-chip Debugging of the AT94K devices.

More information about the JTAG ICE and On-chip Debugging can be found in the AVR
JTAG ICE user guide, available on the Atmel web site.

Figure 2-3.  JTAG Connector

Note:

To determine if your AT94K device supports JTAG Debug, examine the date 
code. Any parts with a J after their date code support JTAG. Example, 4201J.

Figure 2-4 shows how to connect the JTAG ICE probe on the STK594 board. 

Figure 2-4.  Connecting JTAG ICE to the STK594

GND
VTG
RST
N/C
GND

TCK

TDO
TMS

VTG

TDI

1   2

JTAG

Summary of Contents for FPSLIC STK594













































Reviews:

No comments

Brands by name

Popular brands

Load more brands