7
Installation Guide
AT-OME-EX-KIT
LINK
Description
Solid yellow
The link integrity between the transmitter and the receiver is
good.
Blinking yellow
Poor signal integrity between the transmitter and the receiver.
•
Make sure that the category cable between the
HDBaseT
IN
port on the transmitter and the
HDBaseT OUT
port on
the receiver is secure.
•
The category cable may be compromised. Try using a
different category cable. Make sure that the cable is solid
core. Stranded or patch cables are not recommended.
Off
The link integrity between the transmitter and the receiver is
compromised.
•
Check the category cable between the
HDBaseT IN
port
on the transmitter and the
HDBaseT OUT
port on the
receiver.
PWR
Description
Solid green
Unit is powered.
Off
Unit is not powered.
•
Verify that the locking connector is securely fastened to the
power receptacle.
•
Make sure that the power supply is connected to an active
AC outlet.
The
PWR
and
LINK
LED indicator on both the transmitter and receiver unit provides basic
information on the current status of the AT-OME-EX-KIT. The information in the table below
applies to both the transmitter and receiver unit.
LED Indicators
